联系方式 联 系 人：吴昊 经理 联系电话：024-23180560 23180650 传真电话：024-23180512 移动电话：024-8169 5127

产品图片	产品名称/型号	产品简单介绍
	日本安立计器(anritsu-meter)、BTN-41K/BTN-41E BTN-41K/BTN-41E	精度 The thermocouples used in Anritsu Meter products comply with the Class 2 accuracy standards specified within the Japanese Industrial Standard JIS C1602-1995.However, since probes structure and other factors can affect the accuracy of specific temperature measuring probes, please refer to the pertinent pages for information on the precision of specific probes.安立计器产品所使用的热电偶精度为2级（JIS C1602-1995）.但是，温度感应器的精度因其构造不同而有所差异，因此各种感应器精度请参阅各产品的说明页
	日本安立计器(anritsu-meter)SH-14K/SH-14E SH-14K/SH-14E	版权声明：本网页所有内容均属我公司版权所有，任何公司或个人未经本公司协议授权不得转载、链接、转贴或以其他方式复制发布/发表。已经取得本公司协议授权的公司或个人，在下载使用时必须注明“来源：沈阳安立新仪工程仪器有限公司”，违者本公司将依法追究责任。耐久性The probe product pages use the following symbols to indicate probe durability.Note that probe durability can vary significantly depending on actual conditions of use.感应器的耐用性能下以表的记号方式在各个感应器的说明页中表示说明。但是注意，感应器的耐用性能因使用条件的不同会出现很大差异
	日本安立计器(anritsu-meter)SH-46K/SH-46E SH-46K/SH-46E	Stationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth metal surfac
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶SH-46K/SH-46E SH-46K/SH-46E	日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth metal surface moving at a rate of 200 m/min.以200m/分速度移动的平滑金属表面上，在所示精度范围内可测试的时间。日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in dama
	-日本安立计器(anritsu-meter)MW-11K/MW-11E MW-11K/MW-11E	日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in damage.在使用正确的条件下，基本上不会出现因温度测试而引起劣化现象。耐用性是根据碰撞等条件下的易破损程度。日本安立计器ANRITSUOperating temperature limit工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the
	日本安立计器(anritsu-meter)MW-24K/MW-24E MW-24K/MW-24E	本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth metal surface moving at a rate of 200 m/min.以200m/分速度移动的平滑金属表面上，在所示精度范围内可测试的时间。日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in damag
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶MW-24K/MW-24E MW-24K/MW-24E	日本安立计器ANRITSUStationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth
	日本安立计器(anritsu-meter)WE-11K/WE-11E WE-11K/WE-11E	日本安立计器ANRITSUStationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶WE-11K/WE-11E WE-11K/WE-11E	日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth metal surface moving at a rate of 200 m/min.以200m/分速度移动的平滑金属表面上，在所示精度范围内可测试的时间。日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in dama
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶WE-22K/WE-22E WE-22K/WE-22E	日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in damage.在使用正确的条件下，基本上不会出现因温度测试而引起劣化现象。耐用性是根据碰撞等条件下的易破损程度。日本安立计器ANRITSUOperating temperature limit工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶BTN BTN-41K/BTN-41E	同时代理日本Kobayashi Kirokushi公司和Sigma公司、德国Dia_neilsen公司、美国Omega公司和Hotwatt公司及一些世界知名厂商在中国大陆的产品销售业务。我公司备有常用型号大量库存，价格、服务、货期都是您最好的选择，欢迎与我公司联系。 沈阳安立新仪工程仪器有限公司电话：024-23180560 23180650 值班电话：024-81695217传真：024-23180512邮箱：AnLiXinYi@163.com网址：http://www.23180560.comMSN: anlixinyi@hotmail.com联系人：赖小姐地址：沈阳市和平区青年大街386号 华阳国际大厦2475-2476室
	AP-810总代理ANRITSU AP-810	Model AM-8000 series thermometers are compact handheld units that store measurement data in memory.Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.

安立新仪计器中国总代理

电话：024-23180560 23180650    传真：024-23180512

地址：沈阳市和平区青年大街386号 华阳国际大厦2475-2476室  邮编：110004

辽ICP备09013331号-1   网站管理入口