联系方式 联 系 人：吴昊 经理 联系电话：024-23180560 23180650 传真电话：024-23180512 移动电话：024-8169 5127

产品图片	产品名称/型号	产品简单介绍
	CS-21E-010-1-TC1-ANP 日本安立ANRITSU总代理 CS-21E-010-1-TC1-ANP	日本安立计器ANRITSUAbout products made of polyimide聚酰亚氨探针Some Anritsu Meter products are made of polyimide.Since polyimide may adversely affect humans, avoid using such products in applications where they may come into contact with food, internal organs, or bodily fluids.本公司提供了的一部分产品中使用了聚酰亚氨。聚酰亚氨有可能对人体带来不良影响在与食品和体内液体直接接触的情况下请避免命使用
	CS-13K-010-1-TC1-ANP 日本安立ANRITSU总代理 CS-13K-010-1-TC1-ANP	日本安立计器ANRITSUAbout products made of polyimide聚酰亚氨探针Some Anritsu Meter products are made of polyimide.Since polyimide may adversely affect humans, avoid using such products in applications where they may come into contact with food, internal organs, or bodily fluids.本公司提供了的一部分产品中使用了聚酰亚氨。聚酰亚氨有可能对人体带来不良影响在与食品和体内液体直接接触的情况下请避免命使用。
	CS-11E-010-1-TC1-ANP日本安立总代理 CS-11E-010-1-TC1-ANP	日本安立计器ANRITSUOperating temperature limit工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the operating temperature limit is not the same as the allowable temperature limits of the grip, cord, and plug.Note that probes are more easily damaged at temperatures below 0°C, due to frost adhesion, reduced elasticity constant, and other factors.使用根限温度是根据接触测试对象的感应器顶端的的耐热温度来决定。请注意，夹扣、电线和插头部分的耐热温度与使用极限温度有一定差
	CS-11E-010-1-TC1-ANP CS-11E-010-1-TC1-ANP	日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in damage.在使用正确的条件下，基本上不会出现因温度测试而引起劣化现象。耐用性是根据碰撞等条件下的易破损程度。
	CRB-K-TS1-ANP日本安立总代理 CRB-K-TS1-ANP	日本安立计器ANRITSUOperating temperature limit工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the operating temperature limit is not the same as the allowable temperature limits of the grip, cord, and plug.Note that probes are more easily damaged at temperatures below 0°C, due to frost adhesion, reduced elasticity constant, and other factors.使用根限温度是根据接触测试对象的感应器顶端的的耐热温度来决定。请注意，夹扣、电线和插头部分的耐热温度与使用极限温度有一定差
	CR-32K日本安立总代理 CR-32K	日本安立计器ANRITSUOperating temperature limit工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the operating temperature limit is not the same as the allowable temperature limits of the grip, cord, and plug.Note that probes are more easily damaged at temperatures below 0°C, due to frost adhesion, reduced elasticity constant, and other factors.使用根限温度是根据接触测试对象的感应器顶端的的耐热温度来决定。请注意，夹扣、电线和插头部分的耐热温度与使用极限温度有一定差
	CR-31K日本安立总代理 CR-31K	日本安立计器ANRITSUStationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth
	HS-50K 日本安立总代理 HS-50K	日本安立计器ANRITSUStationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth
	HS-30K日本安立总代理 日本安立总代理	工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the operating temperature limit is not the same as the allowable temperature limits of the grip, cord, and plug.Note that probes are more easily damaged at temperatures below 0°C, due to frost adhesion, reduced elasticity constant, and other factors.使用根限温度是根据接触测试对象的感应器顶端的的耐热温度来决定。请注意，夹扣、电线和插头部分的耐热温度与使用极限温度有一定差异。（此外还请注意，在 0°C以下使用时因蒙霜或弹性降低等因素容易造成破损）
	日本安立计器ANRITSU AT-30E-050-0-TC1-ANP AT-30E-050-0-TC1-ANP	日本安立计器ANRITSULiquid or Gas Temperature probes液体或气体测温探头 When used correctly, virtually no deterioration occurs in these products due to temperature measuring operations.Therefore, the durability ranking is based on the ease with which impact results in damage.在使用正确的条件下，基本上不会出现因温度测试而引起劣化现象。耐用性是根据碰撞等条件下的易破损程度。
	AT-30E-050-0-TC1-ANP日本安立计器ANRITSU总代理 AT-30E-050-0-TC1-ANP	日本安立计器ANRITSUStationary Surface Temperature probes固定表面测温测温探头 Number of contacts enabling measurement within the accuracy range on a flat and smooth metal surface at a temperature of 300°C(or at the operating temperature limit if the operating temperature limit is below 300°C).在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准）日本安立计器ANRITSUMoving / Rotating Surface Temperature probes移动/旋转表面测温探头 Time period in which measurement was achieved within the accuracy range, on a flat and smooth
	AT-30K-050-0-TC1-ANP日本安立测温总代理 AT-30K-050-0-TC1-ANP	he accuracy of surface probes can vary significantly depending on measuring conditions, measurement target, and the nature of the contact between the probe and measurement target.When using a probe, make sure the sensor head correctly contacts target surface.表层感应器因测试环境、测试对像以及测试对象司感应器相接状态等条件的不同精度会受到很大影响
	日本安立（ANRITSU-METER）总代理AT-10E-050-0-TS1-ANP AT-10E-050-0-TS1-ANP	he accuracy of surface probes can vary significantly depending on measuring conditions, measurement target, and the nature of the contact between the probe and measurement target.When using a probe, make sure the sensor head correctly contacts target surface.表层感应器因测试环境、测试对像以及测试对象司感应器相接状态等条件的不同精度会受到很大影响。
	日本安立计器(anritsu-meter)AT-10K-050-0-TS1-ANP SC-31K/SC-31E	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶SC-31K/SC-31E
	日本安立计器(anritsu-meter)SC-31K/SC-31E SC-31K/SC-31E	工作温度限制 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target.Note that the operating temperature limit is not the same as the allowable temperature limits of the grip, cord, and plug.Note that probes are more easily damaged at temperatures below 0°C, due to frost adhesion, reduced elasticity constant, and other factors.
	日本安立计器(anritsu-meter)SC-32K/SC-32E SC-32K/SC-32E	在300 °C的平滑表金属表面上，在所示精度范围内可接触测试的次数（ 如是要在300°C度以下，以使用极限温度为准） 本公司提供了的一部分产品中使用了聚酰亚氨。聚酰亚氨有可能对人体带来不良影响在与食品和体内液体直接接触的情况下请避免命使用。
	日本安立计器(anritsu-meter)SF-K-100/SF-E-100 SF-K-100/SF-E-100	在使用正确的条件下，基本上不会出现因温度测试而引起劣化现象。耐用性是根据碰撞等条件下的易破损程度。
	日本安立计器(anritsu-meter)测温探头/测温棒/温度计/热电偶U U-211K/U-211E	同时代理日本Kobayashi Kirokushi公司和Sigma公司、德国Dia_neilsen公司、美国Omega公司和Hotwatt公司及一些世界知名厂商在中国大陆的产品销售业务。我公司备有常用型号大量库存，价格、服务、货期都是您最好的选择，欢迎与我公司联系。 沈阳安立新仪工程仪器有限公司电话：024-23180560 23180650 值班电话：024-81695217传真：024-23180512邮箱：AnLiXinYi@163.com网址：http://www.23180560.comMSN: anlixinyi@hotmail.com联系人：赖小姐地址：沈阳市和平区青年大街386号 华阳国际大厦2475-2476室

安立新仪计器中国总代理

电话：024-23180560 23180650    传真：024-23180512

地址：沈阳市和平区青年大街386号 华阳国际大厦2475-2476室  邮编：110004

辽ICP备09013331号-1   网站管理入口